www.barbandco.com
  • Accueil
  • A propos
  • Store
  • Services
  • Studio
  • Liens
    • Mastering VAST
    • Kronoscopie
    • Kurzweil Music System
    • MOESSIEURS
    • Synth Food
    • Youtube Barb & Co
    • Sven Wannas
  • STORE
  • >
  • Sound Packs
  • >
  • KURZWEIL sounds
  • >
  • Kurzweil SP6
  • >
  • Electro Drome SP6

Electro Drome SP6

SKU:
€18.00
€18.00
Unavailable
per item
64 sounds / 10 multis

For the Kurzweil SP6

Delivery : Instant download
  • Facebook
  • Twitter
  • Pinterest
  • Google+
Add to Cart
Demos :

Utility File :
electrodrome_controls_sp6.pdf
File Size: 346 kb
File Type: pdf
Download File


​"ElectroDrome" is a new soundset of 64 programs and 10 multis for the Kurzweil SP6, exploring the deep sonic ressources of the VAST synthesis. It uses high speed modulations by some tricks, allowing contemporary sounds for modern tracks.
This soundset is the result of months of tests and deep DSP programming to achieve things that were seen on other dedicated instruments...

In this set, you will find some nervous leads, big lush pads, strong basses, snappy synths, crazy FX, percussive electronic drums and a lot of other things for your productions.

And above all this, everything is done in pure VAST, meaning there is not a single sample involved in what your hear.
Just a few basic waveforms from the ROM have been used as modulators...(Yes, drums are pure VAST too...!)

Each sound comes with an array of realtime controls and you will be able to adjust the tone easily.
The buttons have the same functions on all the programs, it's much more easy to remember !
They will allow you to adjust the EQ, post filter, and auxiliary effects depth and send levels.
Picture
Let's check how work the buttons on the SP6 to control the sounds of Electro Drome :
​​EQUALIZER (buttons 1-4)
This section uses a 3 bands equalization stage. The settings of each part is set as follow :
​
1 - LOW gain :
Low shelving EQ, set to 92 Hz, gain from -12dB to +12dB 

2 - MID width :
Bandwith from 0.010 Oct to 5.000 Oct

​3 - MID gain :
Mid band EQ, set to 988 Hz, gain from -12dB to +12dB

4 - HIGH gain :
​High shelving EQ, set to 9956 Hz, gain from -12dB to +12dB
​​FILTER (buttons 5-8)

5 - CUTOFF :

Adjust the filter cutoff frequency. 

6 - RESONANCE :
Adjust the peak point at the filter cutoff frequency.

7 - TYPE :
The filter is coming straight from the Kurzweil effect, and you can change in real time the filter response.
You can select LPF, HPF, BPF and NOTCH by just moving the button

8 - MIX :
This setting will allow you to blend your original sound with the FX multimode filter.
With settings different than 0% (dry) or 100%(wet), you will have a lot of original textures.
Of course, the result will also depends on the filter type...
​AUX EFFECTS (Buttons 9-12)

9 - Aux 1 Depth

Set the depth of auxiliary FX 1, usually the feedback of the chorus

10 - Aux 2 Depth
Set the depth of auxiliary FX 2, usually the feedback of the delay or the time of the reverb

11 - Aux 1 Level
Set the mix of Aux 1, from dry to 50/50 wet signal

12 - Aux 2 Level
Set the mix of Aux 2, from dry to 50/50 wet signal
​Ok, now it's time for you to explore this set and i hope you will have some fun using it.
I also hope you will discover an alternate side of your Kurzweil ! 

Thanks for your time !

All synthsounds programmed by Barb (C) 2017
Drumkit programmed by Yvo & Barb (C) 2017

​Mentions légales / conditions générales de vente
​Paiements sécurisés :​​
Picture
Livraison gratuite pour toute commande de matériel supérieure à 69 euros.
Contact
Copyrights (C) Barb & Co - Sound design & distribution / 2014 - 2025
  • Accueil
  • A propos
  • Store
  • Services
  • Studio
  • Liens
    • Mastering VAST
    • Kronoscopie
    • Kurzweil Music System
    • MOESSIEURS
    • Synth Food
    • Youtube Barb & Co
    • Sven Wannas