- STORE
- >
- Sound Packs
- >
- KURZWEIL sounds
- >
- Kurzweil PC3Le
- >
- Electro Drome PC3Le
Electro Drome PC3Le
SKU:
€18.00
€18.00
Unavailable
per item
64 sounds including 1 drumkit
For the Kurzweil PC3Le
Delivery : Instant download
For the Kurzweil PC3Le
Delivery : Instant download
Demos :
|
|
Utility Files :
![]()
|
![]()
|
"ElectroDrome" is a new soundset of 64 programs for the Kurzweil PC3, PC3Le and Forte series, exploring the deep sonic ressources of the VAST synthesis. It uses high speed modulations by some tricks, allowing contemporary sounds for modern tracks.
This soundset is the result of months of tests and deep DSP programming to achieve things that were seen on other dedicated instruments...
In this set, you will find some nervous leads, big lush pads, strong basses, snappy synths, crazy FX, percussive electronic drums and a lot of other things for your productions.
And above all this, everything is done in pure VAST, meaning there is not a single sample involved in what your hear.
Just a few basic waveforms from the ROM have been used as modulators...(Yes, drums are pure VAST too...!)
Each sound comes with an array of realtime controls and you will be able to adjust the tone easily.
Some controllers have the same functions on all the programs, it's much more easy to remember !
They will allow you to adjust the post filter, EQ and effects settings.
Let's have a look at the global PC3Le's commands :
This soundset is the result of months of tests and deep DSP programming to achieve things that were seen on other dedicated instruments...
In this set, you will find some nervous leads, big lush pads, strong basses, snappy synths, crazy FX, percussive electronic drums and a lot of other things for your productions.
And above all this, everything is done in pure VAST, meaning there is not a single sample involved in what your hear.
Just a few basic waveforms from the ROM have been used as modulators...(Yes, drums are pure VAST too...!)
Each sound comes with an array of realtime controls and you will be able to adjust the tone easily.
Some controllers have the same functions on all the programs, it's much more easy to remember !
They will allow you to adjust the post filter, EQ and effects settings.
Let's have a look at the global PC3Le's commands :
FILTER :
MIX :
This setting will allow you to blend your original sound with the FX multimode filter.
With settings different than 0% (dry) or 100%(wet), you will have a lot of original textures.
Of course, the result will also depends on the filter type...
TYPE :
The filter is coming straight from the Kurzweil effect, and you can change in real time the filter response.
You can select LPF, HPF, BPF and NOTCH by just moving the slider.
CUTOFF :
Adjust the filter cutoff frequency.
RESONANCE :
Adjust the peak point at the filter cutoff frequency.
This setting will allow you to blend your original sound with the FX multimode filter.
With settings different than 0% (dry) or 100%(wet), you will have a lot of original textures.
Of course, the result will also depends on the filter type...
TYPE :
The filter is coming straight from the Kurzweil effect, and you can change in real time the filter response.
You can select LPF, HPF, BPF and NOTCH by just moving the slider.
CUTOFF :
Adjust the filter cutoff frequency.
RESONANCE :
Adjust the peak point at the filter cutoff frequency.
EQUALIZER :
This section uses a 3 bands equalization stage. The settings of each part is set as follow :
LOW :
Low shelving EQ, set to 92 Hz, gain from -12dB to +12dB
MID :
Mid band EQ, set to 988 Hz, bandwith is 2.5 Oct, gain from -12dB to +12dB
HIGH :
High shelving EQ, set to 9956 Hz, gain from -12dB to +12dB
LOW :
Low shelving EQ, set to 92 Hz, gain from -12dB to +12dB
MID :
Mid band EQ, set to 988 Hz, bandwith is 2.5 Oct, gain from -12dB to +12dB
HIGH :
High shelving EQ, set to 9956 Hz, gain from -12dB to +12dB
EFFECTS :
This section uses 3 main effects in serial.
You will find chorus, delay and reverb. Each effect has its own level setting.
Reverb Time :
In addition to the level control, this parameter allows you to set the reverb time from 1 second to 20 seconds
You will find chorus, delay and reverb. Each effect has its own level setting.
Reverb Time :
In addition to the level control, this parameter allows you to set the reverb time from 1 second to 20 seconds
Additionnal controls :
Beside the controls explained above, each program comes with some additionnal controls with the pitchwheel, modwheel, switch and aftertouch. You have all details of these controls in the PDF file found in the Utility Files section.
As usual, you have a parameter feedback on the screen of your instrument to check what you are doing !
As usual, you have a parameter feedback on the screen of your instrument to check what you are doing !
Ok, now it's time for you to explore this set and i hope you will have some fun using it.
I also hope you will discover an alternate side of your Kurzweil !
Thanks for your time !
All synthsounds programmed by Barb (C) 2017
Drumkit programmed by Yvo & Barb (C) 2017
Ok, now it's time for you to explore this set and i hope you will have some fun using it.
I also hope you will discover an alternate side of your Kurzweil !
Thanks for your time !
All synthsounds programmed by Barb (C) 2017
Drumkit programmed by Yvo & Barb (C) 2017